Specification:
-
Brand new
-
Size: approx. 70 * 53 * 10mm
-
Cable length: approx. 300mm
-
With overcharge protection, over discharge protection, over current protection and Balance.
-
Short circuit protection, temperature protection.
-
Fine workmanship and good performance.
-
Long service life.
| Discharge |
Continuous Discharging Current |
20 A |
|
Instantaneous Discharge Current |
60 A | |
| Charge | Charging Voltage | 54.6 V |
| Charging Current | 8 A | |
| Overcharge Protect | Over-charge Detect | 3.8±0.05 V |
| Protect Delay | 100 mS | |
| Over-charge release | 3.8±0.05 V | |
| Balance | Detect Voltage | 3.8±0.025 V |
| Release Voltage | 3.8±0.05 V | |
| Balance Current | 60±5 mA | |
| Over-discharge Protect | Over-discharge Detect | 2.3±0.08 V |
| Over-discharge Detect delay | 50 mS | |
| Release Voltage | 2.3±0.1 V | |
| Over-current Protect | Detect Voltage | 150 mV |
| Detect Delay | 2 mS | |
| Current Detect | 60±10 A | |
| Release Condition | Cut Load | |
| Short-circuit Protect | Protect Condition | Cut Load |
| Detect Delay | 200 uS | |
| Release Condition | Cut Load | |
| Temperature Protect | Temperature Protect | / ? |
| Resistance | Inner | =15 mO |
| Self-Consumption | Working Current | =60 uA |
| Sleep Current (when Over-discharge) | =10 uA | |
| Working Temperature | Range | -30/+80 ? |
Wiring instructions:
power cable
B-:Connect to battery negative (Black cable 14AWG L=150±5mm)
P-:Connect to negative of discharge port (Blue cable 14AWG L=150±5mm)
C-:Connect to negative of charge port (yellow cable 18AWG L=150±5mm)
Voltage monitoring cable
cable type:UL1007 22AWG L=300±5mm
B-(Black),B14+(Red)
B-(GND)/B1/B2/B3/B4/B5/B6/B7/B8/B9/B10/B11/B12/B13/B14 (B+)
Remarks:
Please connect B- line firstly, and then connect voltage monitoring wiring harness. The last step is to connect charge and discharge lines. If you want to remove them, the order should be reversed. Please pay attention to the connection order, or it will damage the component.
