8S BMS 60A NTC Sensor LiFePO4 Protection Board Balance PCB Battery 3.2V
8S BMS 60A LiFePO4 Protection Board Balance PCB Battery 25.6V 3.2V Sensor und Stecker 22V 25V
Mit Temperatur Sensor/Schalter
?1.Protection Circuit Board for 28.8VV 8S LiFePO4 battery pack
2.PCB applies for 8 cells LiFePO4 battery pack with E-switch integrated, E-Switch can totaly turn off the output;
3.To prevent the battery packs from overcharge,overdischarge,over current, over temperature ,short circuit ;
4.With cell balance/equilibrium function;
5.Compatible with LiFePO4 cells.
6.How balancing function works? After battery pack is fully charged. PCM will detect each cell's voltage and trim higher voltage down until other cells reach the same voltage level. Therefore, it helps cells have longer service life.
No. |
Test item |
Criterion |
|
1 | Voltage | Charging voltage |
DC:28.8V CC/CV |
Balance voltage for single cell | LiFePO4: 3.65 V±0.025V | ||
2 | Current | Balance current for single cell | 42±5mA |
Current consumption for single cell | =20µA | ||
Maximal continuous charging and discharging current | 60A | ||
3 | Over-charge Protection | Over charge detection voltage | 3.625±0.025V ) |
Over charge detection delay time | 0.96S—1.4S | ||
Over charge release voltage | 3.275±0.025V | ||
4 | Over-discharge Protection | Over discharge detection voltage | 2.50±0.05V |
Over discharge detection delay time | 115—173mS | ||
Over discharge release voltage | 2.30±0.05V | ||
5 | Over-Current Protection | Over current detection voltage | 0.15±0.015V |
Over current detection current | 50±10A | ||
Detection delay time | 7.2ms—11ms | ||
Release condition | Cut load | ||
6 | Short Protection | Detection condition | Exterior short circuit |
Detection delay time | 200-500us | ||
Release condition | Cut load | ||
7 | Resistance | Protection circuitry(B- to P-) | =30mO |
8 | Temperature | Operating temperature range | -40~+85°C |
Storage temperature range | -40~+125°C | ||
9 | Size |